Numerade

Questions asked

BEST MATCH

Who can make a fully deductible contribution to a traditional IRA? A. Anybody; all IRA contributions are fully deductible regardless of income level B. Someone making contributions to an educational IRA C. An individual not covered by an employer-sponsored plan who has earned income D. A person whose contributions are funded by a return on investment

View Answer

BEST MATCH

in a study of 1800 households, about 35% own at least one cat. Find the margin of error and the 95% condicence interval for the percentage

View Answer

BEST MATCH

Find the directional derivative of the function at point P in the direction of v. f(x, y) = xy, P(0, -2), v = \frac{1}{2}i + \frac{\sqrt{3}}{2}j

View Answer

BEST MATCH

The peak flux density of the rotor magnetic field of the 4-pole generator is 0.5 T, and the mechanical speed is 3600 r/min. The stator diameter of the machine is 0.5 m, its coil length is 5 cm and there are 400 turns per coil. If the machine is delta-connected, determine the following: 1.1 the three-phase voltage of the generator as a function of time; (5) 1.2 the RMS phase voltage; (1) 1.3 the RMS terminal voltage; (1) 1.4 the loop current through a 10 $\Omega$ resistor; (2) 1.5 the magnitude and direction of the torque; (3) 1.6 the instantaneous and average power; (4) 1.7 the mechanical power. (3)

View Answer

BEST MATCH

Which one has the highest concentration of proteins? Group of answer choices urine after tubular reabsorption urine after tubular secretion urine that enters renal pelvis blood in efferent kidney arteriole blood in afferent kidney arteriole

View Answer

BEST MATCH

Part A In the figure (Figure 1) the weight to is 62.9 N. What is the tension in the diagonal string? Express your answer in newtons. $T =$ Submit Request Answer Part B Find the magnitudes of the horizontal forces $\vec{F}_1$ and $\vec{F}_2$ that must be applied to hold the system in Express your answers in newtons separated by a comma. $F_1, F_2 =$ Submit Request Answer

View Answer

BEST MATCH

Explain the following terms: (i) Operating Leverage; (ii) Margin of safety; (in) Indirect cost

View Answer

BEST MATCH

a. How many people were surveyed? b. How many people believed only environmental issues were important? c. How many people believed only environmental issues were important?

View Answer

BEST MATCH

The 215N weight sign is supported by a 155N uniform bar as shown in the figure. Find the tension in the wire, as well as the horizontal and vertical forces exerted by the end attached to the wall. If sol: T=602N, Tx=493N, Fy.... N. Perform the calculations to get to the results.

View Answer

BEST MATCH

5. [10pt] The SAR ADC (shown as below) and Vref = 10 V, 1). What is the full scale input voltage of the ADC? 2). Compute the digital output with input voltage of 7.28 Volts? What is the conversion error? 3). If D7~Do is: 11101011, what's the voltage value? 4). What's the maximum comparison times for ADC conversion if Vin = VREF = 6 V?

View Answer

tracy m.